Bottle & Filling Machines

Blow molding (also known as blow moulding or blow forming) is a manufacturing process by which hollow plastic parts are formed. In general, there are three main types of blow molding: extrusion blow molding, injection blow molding, and stretch blow molding. The blow molding process begins with melting down the plastic and forming it into a parison or preform. The parison is a tube-like piece of plastic with a hole in one end in which compressed air can pass through.

The parison is then clamped into a mold and air is pumped into it. The air pressure then pushes the plastic out to match the mold. Once the plastic has cooled and hardened the mold opens up and the part is ejected.

KHS & Krones 60,000 Bottles/Hr Filling Line

High Quality Filling Line for Soft Drinks and Mineral Water. Approximate Output 60,000 0.33 Little Non-Returnable Glass Bottles With Aluminium ... More information →

Krones 19,000 Bottles/Hr Filling Line

19,000 Bottles per hour filling line for 1.5 litre bottles constructed by Krones, P&G and APV equipment. Reportedly installed in ... More information →

Nissei ASB PB85/110-16/4M

Year 2000/2001 PET bottle capacity from 250ml to 3000ml 2900 bottles per hour of bottle 1.5 Litres 2600 bottles per ... More information →

Polycarbonate 19L Water Bottle SIG Kautex plant & Mould

Year 2001 SIG Kautex KB machine Material Hoppers Material In-Feed (capacity 1 Octobin) Dryers (Hopper 1 + Hopper 2) Dehumidifier ... More information →

Sasib 6000 Bottles/Hr Aseptic Filling Line

6000 Bottles per Hour Sasib Aseptic Filling Line for 0.5 and 1.5 Litre PET Bottles – Reportedly manufactured in year ... More information →

Sidel 16,000 Bottles/Hr Filling Line

Model Sidel SBO 14 Series 2 Filling Line For Soft Drinks and Still or Carbonated Water. Capacity of 16,000 bottles/hour ... More information →

Sidel Combi 25-28,000 Bottles/Hr Filling Line

Sidel Model SBO 20 Combi Filling Line for Still & Carbonated Mineral Water and Soft Drinks – 25,000 to 28,000 ... More information →

Uniloy MSA95/D, Twin Head & Double Station

Model MSA95/D Year 1999 Screw diameter 60 mm, L/D 24, continuous flow Clamp force 28kN Dry cycles per min 21 ... More information →

W. Muller 8.2.2 Blowmoulding Machine

  Year of manufacture 1993/94 x3 Machines of the same specification Heads 8 (centre distance 100 mm) Single Station Screw ... More information →

W. Muller 8.2.2 Blowmoulding Machine

Year of manufacture 1993-94 x3 Machines of the same specification Heads 8 (centre distance 100 mm) Single station Screw diameter ... More information →